was successfully added to your cart.


Discussions with John WrightRife Advancement

JWLABS Rife machines – We’ve come a Long Way!

By August 4, 2016 11 Comments

Back in the old days, Rife machines were much more delicate and fairly temperamental.  To illustrate just how extreme this could sometimes be, the JWLABS Model B always had a grounded binding post and instructions that explained how to ground the machine using a wire bolted to a garden spade.  The wire was inserted into the binding post, and the spade was pushed into the thoroughly watered soil.

JWLABS Model B 2 Rife machine

JWLABS Model B 2 Rife machine

Today we laugh that such a measure would be necessary.  Of course, Model B had a huge power supply transformer and a couple of vacuum tubes that operated at around 350 volts, so if the building ground was overloaded or at all faulty, the unit would not have enough ground contact to operate properly.  It was not an uncommon problem. Sometimes the user would have to call in the electric company or a contractor to correct a faulty house ground.

Model B machines were a lot more complicated, and had a lot more components that were subject to damage and failure. When a customer reported a problem with the machine, we had to troubleshoot an extensive list of things in order to confirm that the machine was truly not operating properly before it was returned for replacement under warranty.

Today, JWLABS Model machines do not require any high voltage components, so the entire circuit can operate on 6 volts DC/battery power.  And there’s a lot less to go wrong.  But there’s never a dull moment when it comes to troubleshooting.

The most commonly reported failure on any Model A is no output.  The most common reason for this is that the volume of the customer’s media player is not set high enough for Model A to “hear”.  We rarely have machines returned, but of the few Model A machines that are returned due to no output, over 95% have nothing wrong with them.

Our new Model A4 eliminates this issue, as it will run on a re-chargeable battery. Furthermore, over 300 frequency sessions (hand-tuned from the Model B) will be on board.  No more media player.  And fewer wires.

In development for over three years, we will be announcing our pre-launch very soon!

In the meantime, see our Model A3 troubleshooting tips HERE:



JWLABS Model A3 Rife machine


UPDATE: JWLABS advances Rife therapy with the Model A4. Learn about our touch-screen Rife machine which delivers hand-tuned frequency sessions. We have preserved the integrity of our analog signal. This Rife machine is a gem!

Click an image to learn more about our Model A4.

JWLABS - The finest in Rife technology!

JWLABS Model A4. The only touch screen Rife machine.

JWLABS Model A4 - The latest advancement in Rife technology!

JWLABS Model A4 – The latest advancement in Rife technology!

JWLABS Model A4 Rife machine

John Wright

About John Wright

The son of an inventor, and an inventor in his own right, John Wright operated Wright Laboratories for his projects long before he embarked on the Rife machine project. Some of John's fields of interest include: drafting and design, electronics, physics, mechanics, molecular biology, chemistry, astronomy, microscopy, radio, geology, botany, pharmacology, genetics, zoology, world religion, law, languages, masonry, and oceanography. For John's full bio, click here.


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.